VMI Viber X, Manual

17

TECHNICAL SPECIFICATIONS VIBER X1™

INPUT SENSITIVITY:

100mV/g calibrated at 156.15 Hz.

MEASURING RANGE:

  Velocity:  0-200 mm/s RMS

FREQUENCY RANGE:

  Total level 2-3200 Hz 

                                                 Adjustable 

fi

 lters: 2-10, 1000 - maximum

 Hz

 Bearing condition 500 Hz – 20 kHz

WEIGHT: 

 270 gram with accelerometer and  

 batteries

 The measurement mainly follows 

 ISO10816-3.

ACCURACY*: 

 Better than +/- 3 %

* This value can be higher, close to the 

fi

 lters cut off frequency.

BATTERY TYPE: 

 3 pc of AAA Rechargeable

VIBRATION TRANSDUCER*

The accelerometer VMI 192 has a sensitivity 100mV/g +/-10%.

MAGNET SUPPORT

Length: 20mm, Diameter: 15mm, Magnet force: about 14kg

Note!   

You must avoid to use other accelerometers bacause of the calibration. 

If you change accelerometer the instrument must be calibrated to 

preserve the accuracy.

Technical data VIBER X

.

You should avoid using other accelerometers 

because of instrument calibration. If you 

change the accelerometer, the instrument 

must be calibrated to preserve the accuracy.

TM

Note 2.     Wait until the instrument has stabilized 

                 resonably well, before starting measurement.

Note 1.