Step 1
Before starting, lay out all parts to your mount and match them to
the parts list provided. Verify that you have all your parts before at-
tempting to assemble the mount.
Note: Parts 12 and 15 will not be used in this assembly.
Step 2
Insert the ceiling tube into the center hole of the ceiling plate
. Mark the ceiling or desired mounting surface in preparation of
installation of ceiling plate . Pre-drill if necessary and mount the
ceiling plate to desired surface.
Warning: Please verify that your mounting surface will support the
combined weight of your mount, mounting hardware, and moni-
tor. Also verify that the mounting surface is safe to drill through. If in
doubt, please contact a professional installer.
Step 3
Attach the plastic connector to the support tube using the
M5 screw .
Step 4
Insert the longer 5/16” screw up through the bottom of the sup-
port tube so it comes out the top of the plastic connector .
Place the platform onto the 5/16” screw and secure the
platform using the washer and nylon nut . Attach the plastic
swivel to the plastic connector .
Step 5
Attach the support tube to the ceiling tube using the shorter
5/16” screw and nylon nut .
Step 6
Snap both halves of the plastic cover onto the ceiling plate .
Please verify that all nuts and screws are securely tightened. After doing
so, place the TV on the platform and use the safety strap by insert-
ing the end without the grip through the slot on either side of the platform
going over your TV through the other slot in the platform and wrap-
ping under the platform and cinching the strap tight.
Step 2: Attaching the ceiling plate to the
ceiling (Lag screws are not included)
Step 3: Attaching the plastic connector
2
Step 5 : Attaching the support
tube to the ceiling tube
1
1
1
6
3
11
4
6
3
5
10
11
8
6
7
3
2
10
13
WARNING: The installer of these products must verify that the mount-
ing surface, ceiling or wall, will safely support the combined weight
of all attached equipment and hardware. Video Mount roducts will
not be held liable for the improper use or installation of its products.
Enjoy Your Mount!
Step 4: Attaching the platform
4
4
1
9
14
