Configuring VCM for Integration
2
Configuring VCM for Integration
The integration with ADM is built into VCM. To configure the integration with ADM, you only need to
configure the ADM integration settings.
Configuring VCM Integration Settings
Before you can use the ADM integration options, you must configure the settings.
1. In VCM, Select the setting to be configured, and then click
Edit Settings
.
2. The
Settings Wizard
page appears. The information to be configured in the wizard varies depending
on selected setting. The configuration options are as follows:
n
ADM Integration Enabled
n
Select
Yes
to enable the integration or
No
to disable the integration.
n
If enabled, the
View ADM Detail
and
View ADM Map
buttons become active when you
are working with machine data, for example,
Console | Windows | Operating Systems
| Machines
.
n
If the setting is enabled, the
ADM Reporting Database Name
and
ADM Server Name
or IP Address
must also be configured.
n
ADM Reporting Database Name
n
Type the name of the SQL database created on the Collector to synchronize with the
ADM database. The default value is ADM.
n
ADM Server Name or IP Address
n
Type the IP address or server name of the ADM server.
n
Maximum number of hosts that may be submitted to ADM Map View
n
Type the maximum number of machines/hosts to display when you select the
View
ADM Map
button. While 10 is the default value, it is recommended that you only view 3
or 4 devices in a map view. If you view more than 4 devices, the displayed map is too
complex to be useful.
3. Verify your settings. Click
Finish
. The settings are applied.
N
OTE
You must either press F5 to refresh the Console, or log out and log back in to view the active
buttons.
VMware, Inc.
9
