G-303 Quick User Manual Document: G-30301
------------------------------------------------------------------------------------------------------------------------------------------------
5
Outlook and Functions
Helpful tips
1. Toggle on CH A/B keypad will circulate the OSD control between CH-A & CH-B.
2. Toggle on 2D/3D keypad will circulate between 2D and auto 3D mode.
3. Toggle R/L Swap key will reverse RH/LH output ports. It is useful in active 3D signal display.
4. Toggle L/R ID key can identify R&L texts for RH/LH channel outputs to confirm right setting in passive 3D.
5. Toggle INFO key can see Input and Output display modes and system information. To make sure right
system setting is set.
6. OSD Lock / Unlock: When continuously press [MENU] key in Front Panel or IR Remote Controller for 5
seconds, the OSD function will be locked to prevent from the changes of the settings by other people. To
press MENU key for 5 seconds again, it will unlock OSD and user can manipulate the OSD again.
7. Picture menu in the OSD can only be activated while the input signal is not in color [Preset Mode]. To select
[Image Properties]
[Custom]
[Save], then user can activate [Picture] menu again.
8. [Image Setup] menu will not be activated if the input source is not from VGA.
9. To reset GeoBox to make sure no unexpected setting inside before use. Procedures to do system Reset:
OSD Menu [Options]
[Reset]
[Reset All]
10. To set [Menu Time Out] to “0”, the OSD will appear till the OSD Menu has been turned off.
11. To set [Logo Time Out] to “0”, the splash screen logo will not be showed while GeoBox is powered on.
12. Shortcut Hot Keys on the front panel are only functional while the OSD menu is not activated. Once the OSD
menu is activated, these keys will be served as OSD functional keys.
13. The audio from PC audio input Jack on the front panel will be mixed with video and output to RH/LH output
ports through HDMI connection.
14. The embedded audio from HDMI input signal can be decoded into stereo analog audio and output to PC
audio output Jack on the front panel.
