G901 User Guide Document: G901-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
9
8
Image rotation and flip
✓
There are two image Orientation OSD menu. One for main input and the second is for second
input for PIP/POP.
✓
Image can be rotated at 90/180/270 degrees and flipped at Right/Left, Top/Bottom or Front/Rear.
This function can support up to 4k/60Hz input signal.
✓
Image 90/270 degrees rotation is for edge blending with projector at portrait position or video
wall with monitor installed at portrait position. There is no need to rotate signal source.
✓
Image flip is for projector to project image from rear or top position.
✓
When main image is rotated or flipped, the OSD will be rotated together with main image.
✓
User can see the direction of the TEXT “R” to do image flip and rotation.
✓
Main image and PIP image can be rotated independently.
Rotation for main input Rotation for sub-input (PIP)
9
PIP/POP setting
➢
PIP (Picture in Picture)
- PIP image size is from 320*180 to 1920*1200.
- Flexible position across entire video wall.
- PIP image size and aspect ratio can be adjusted through [Overlap] function
- Main & PIP input source is swappable
- PIP image can be across entire video wall at any position
