G901 User Guide Document: G901-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
16
13 Load Profile Index through Remote controller
➢
Press [Profile] shortcut key
→
Select number keys 1-5
to recall Index 1
– Index 5.
14 OSD Lock and Unlock
To press MENU on remote controller for 5 seconds will LOCK the OSD. To press another 5 seconds on
MENU key will UNLOCK OSD.
15 System setup
15.1 Setup by Remote Controller
✓
If multiple units are used, user can set different [Box ID] (#1 - #99) to each GeoBox in control
system. For IR control, the number range is #1 - #9.
✓
User can control individual GeoBox through below method when all boxes or IR extender
receivers are installed together.
✓
Press 851 number key on remote controller will lock all other GeoBox OSD menu except
ID #1 GeoBox. User can see flashing Power LED for the units with OSD locked.
✓
Press 853 will only unlock ID # 3 GeoBox for further OSD operation.
✓
Press 850 will unlock all GeoBox OSD menu. Remote controller can access to all box
simultaneously.
15.2 Setup by Ethernet
User can connect all G901 in one Ethernet (or WiFi) Router (or switch hub) LAN ports and set
different Static IP address for each Box, then use WebGui virtual keys or UHDWall Manager
(UWM) PC tool to control each G901 independently. If user connects PC to the same Router and
set Router with DHCP mode, PC can access to G901 directly. If PC is not connected with the
same Router, user needs to set PC with the same Domain Segment as G901 for Ethernet
connection. Default IP address is 192.168.0.100. Telnet port is 23 and TCP server port is 1266.
Load
Index
Hotkey
Number
key
