4
4) Setting the time – Press the Up arrow button to increase the mixing time (in seconds) and
the Down arrow button to reduce the mixing time (in seconds).
5) Press the START button to begin the mixing process. The device stops automatically once
the set mixing time has elapsed. To interrupt the mixing process, press the START button
again.
6) Once mixing is complete, open the protective cover and remove the mixed capsule, which
can be used immediately.
5. Safety precautions and maintenance
1) Safety precautions
a) The four locking screws must be removed before the device is used for the first time.
b) Position the device on a flat surface with sufficient ventilation.
c) Ensure that the On/Off switch can be accessed easily and that the cable is connected
securely to the device.
d) Close the protective cover before starting the device using the START button. Allow
an adequate interval between multiple mixing processes so as to protect the device
against overheating.
e) Please observe the instructions for use before using the device so as to avoid damage
to the device and personal injuries.
2) Maintenance
a) Keep the device clean. The housing and capsule holder can be cleaned with a cloth
moistened with alcohol.
b) The device should not be left unused for extended periods of time. When not in use,
please disconnect the device from the power and store it in its original packaging.
USER MANUAL
français
Español
Italiano
English
d
eutsch
