FAQ
1. Make sure your accessory is powered on and nearby.
2. If you use a dual 2.4G/5G network router, please turn off the 5G network. Connect
your phone with 2.4G network and add the device again.
3. Make sure that the router setting meets the relevant requirements. The device only
supports the mode of WPA/WPA2-PSK.
4. Make sure that the LED indicator (green light) flashes quickly. If not, please
press & hold the Reset Button for about 5s to restore factory settings.
5. Select the accessory shown on screen, then scan the setup code (XXX-XX-XXX)
which can be found on the device, instruction manual or inner packaging.
Q1. Why did I fail to add my PM1 to the LinkWise App?
Resetting the device can help you troubleshoot any issues you may have. To reset it
tofactory defaults, press & hold main power button for about 5 seconds.
Factory Resetting
To gain better experience with VOCOlinc product, we strongly recommend that you
update the firmware whenever updates with all the latest improvement and fixes are
available:
1. Launch LinkWise.
2. Long press device icon to enter the menu.
3. Look for “Firmware update” and tap it, and then tap “Update”.
*Only the devices that are currently reachable and have an available update will
prompt firmware update notice.
*It is important to leave the LinkWise app running while it finishes updating the device.
Try not to minimize the app, close the app, or interrupt the update to prevent problems.
Firmware Update
18
Summary of Contents for PM1
