background image

2

Safety Instructions

CAUTION

RISK OF SHOCK

CAUTION: To reduce the risk of electric shock, 

do not remove cover (or back). No user-

serviceable parts inside. Only refer servicing to 

qualified service personnel.

WARNING

To reduce the risk of fire or electric shock, do 

not expose this unit to rain or moisture.  

Explanation of Graphical Symbols

The lightning flash & arrowhead 

symbol, within an equilateral triangle, 

is intended to alert you to the 

presence of danger.

The exclamation point within an 

equilateral triangle is intended to alert 

you to the presence of important 

operating and servicing instructions.   

1. Read Instructions

 - All the safety and operating 

instructions should be read before the appliance is 

operated.

2. Retain Instructions

 - The safety and operating 

instructions should be retained for future reference.

3. Heed Warnings

 - All warnings on the appliance and in 

the operating instructions should be adhered to.

4. Follow Instructions

 - All operating and use 

instructions should be followed. 

5. Attachments

 - Do not use attachments not 

recommended by the product manufacturer as they may 

cause hazards.

6. Water and Moisture

 - Do not use this unit near water. 

For example, near a bathtub or in a wet basement and 

the like.

7. Carts and Stands

 - The appliance should be used 

only  with a cart or stand that is recommended by the 

manufacturer.

7 A.

 An appliance and cart combination  

should be moved with care. Quick stops, 

excessive force, and uneven surfaces may 

cause an overturn.

8. Ventilation

 - The appliance should be situated so its 

 location does not interfere with its proper ventilation. For  

 example, the appliance should not be situated on a bed,  

 sofa, rug, or similar surface that may block the  

 ventilation slots.

9. Heat

 - The appliance should be situated away from

 heat sources such as radiators, heat registers, 

 stoves, or other appliances (including amplifiers) 

 that produce heat.

10. Power Sources

 - The appliance should be 

 connected to a power supply only of the type described 

 in the operating instructions or as marked on the  

 appliance.

                                                                                          

11. Grounding or Polarization

 – Precautions should be 

 taken so that the grounding or polarization means of 

 an appliance is not defeated.

12. Power-Cord Protection

 – Power-supply cords 

 should be routed so that they are not likely to be walked 

 on or pinched by items placed upon or against them, 

 paying particular attention to cords at plugs,  

 convenience receptacles, and the point where they exit  

 from the appliance.

13. Cleaning

 – Unplug this unit from the wall outlet 

 before cleaning. Do not use liquid cleaners or 

 aerosol cleaners. Use a damp cloth for cleaning.

14. Power lines

 – An outdoor antenna should be 

 located away from power lines.

15. Nonuse Periods

 – The power cord of the appliance 

 should be unplugged from the outlet when left unused  

 for a long period of time.

16. Object and Liquid Entry

 – Care should be taken so 

 that objects do not fall and liquids are not spilled into the  

 enclosure through openings.

17. Damage Requiring Service

 – The appliance should 

 be serviced by qualified service personnel when:

A.  The power supply cord or plug has been damaged; or 

B.  Objects have fallen into the appliance; or

C.  The appliance has been exposed to rain; or

D.  The appliance does not appear to operate normally 

      or exhibits a marked change in performance; or

E.  The appliance has been dropped, or the enclosure 

      damaged.

18. Servicing

 – The user should not attempt to service 

 the appliance beyond that described in the operating 

 instructions. All other servicing should be referred to 

 qualified service personnel.

Note: 

To CATV system installer’s (U.S.A.): This reminder is 

provided to call the CATV system installer’s attention to 

Article 820-40 of the NEC that provides guidelines for 

proper grounding and, in particular, specifies that the 

cable ground shall be connected as close to the point of 

cable entry as practical.

Summary of Contents for DA-8808VE



















Reviews: