background image

5

CAUTION

RISK OF SHOCK

CAUTION: To reduce the risk of electric 

shock, do not remove cover (or back). No 

user-serviceable parts inside. Only refer 

servicing to qualified service personnel.

WARNING

To reduce the risk of fire or electric shock, do 

not expose this unit to rain or moisture.  

Explanation of Graphical Symbols

The lightning flash & arrowhead 

symbol, within an equilateral triangle, 

is intended to alert you to the 

presence of danger.
The exclamation point within an 

equilateral triangle is intended to alert 

you to the presence of important 

operating and servicing instructions.   

1. Read Instructions

 - All the safety and operating 

    instructions should be read before the appliance is 

    operated.

2. Retain Instructions

 - The safety and operating 

    instructions should be retained for future reference.

3. Heed Warnings

 - All warnings on the appliance and in 

    the operating instructions should be adhered to.

4. Follow Instructions

 - All operating and use 

    instructions should be followed. 

5. Attachments

 - Do not use attachments not 

    recommended by the product manufacturer as they 

    may cause hazards.

6. Water and Moisture

 - Do not use this unit near water. 

    For example, near a bathtub or in a wet basement and 

    the like.

7. Carts and Stands

 - The appliance should be used 

    only with a cart or stand that is recommended by the 

    manufacturer.

7 A.

 An appliance and cart combination 

    should be moved with care. Quick stops, 

    excessive force, and uneven surfaces may 

    cause an overturn.

8. Ventilation

 - The appliance should be situated so its 

    location does not interfere with its proper ventilation. 

    For example, the appliance should not be situated on a 

    bed, sofa, rug, or similar surface that may block the 

    ventilation slots.

9. Heat

 - The appliance should be situated away from

    heat sources such as radiators, heat registers, 

    stoves, or other appliances (including amplifiers) 

    that produce heat.

10. Power Sources

 - The appliance should be 

      connected to a power supply only of the type 

     described in the operating instructions or as marked 

     on the appliance.

                                                                                          

11. Grounding or Polarization

 - Precautions should be 

      taken so that the grounding or polarization means of 

      an appliance is not defeated.

12. Power-Cord Protection

 - Power-supply cords 

      should be routed so that they are not likely to be 

      walked on or pinched by items placed upon or 

      against them, paying particular attention to cords at 

      plugs, convenience receptacles, and the point where 

      they exit from the appliance.

13. Cleaning

 - Unplug this unit from the wall outlet 

      before cleaning. Do not use liquid cleaners or 

      aerosol cleaners. Use a damp cloth for cleaning.

14. Power lines

 - An outdoor antenna should be 

      located away from power lines.

15. Nonuse Periods

 - The power cord of the appliance 

      should be unplugged from the outlet when left unused 

      for a long period of time.

16. Object and Liquid Entry

 - Care should be taken so 

      that objects do not fall and liquids are not spilled into 

      the enclosure through openings.

17. Damage Requiring Service

 - The appliance should 

      be serviced by qualified service personnel when:
A.  The power supply cord or plug has been damaged; or 

B.  Objects have fallen into the appliance; or

C.  The appliance has been exposed to rain; or

D.  The appliance does not appear to operate normally 

      or exhibits a marked change in performance; or

E.  The appliance has been dropped, or the enclosure 

      damaged.

18. Servicing

 - The user should not attempt to service 

      the appliance beyond that described in the operating 

      instructions. All other servicing should be referred to 

      qualified service personnel.

Note: 

To CATV system installer's (U.S.A.): This reminder is 

provided to call the CATV system installer's attention to 

Article 820-40 of the NEC that provides guidelines for 

proper grounding and, in particular, specifies that the 

cable ground shall be connected as close to the point of 

cable entry as practical.

Safety Instructions

Summary of Contents for Digital-34-Ultra





















Reviews: