14
Descriptions and Features
13. CH 1/2/3 LEVEL knobs
– Use these knobs to increase/decrease the volume level for these channels. Turn clockwise
to increase, and counterclockwise to decrease.
14. MASTER VOLUME knob
– Use this knob to increase/decrease the volume for all the channels (1-3) combined. Turn
clockwise to increase, and counterclockwise to decrease.
15. MASTER VOLUME LED indicators
– These LED indicators display the output level of the master output. Use these indi
-
cators to monitor the output level for distortion. When the output level reaches the AMBER LED, lower the master volume
with the master volume knob.
16. POWER ON LED indicator
– This LED will light green when the unit is powered on.
17. EFFECT LEVEL knob
– Use this knob to increase/decrease the DSP effects applied to all channels (1-3). Turn clock
-
wise to increase, and counterclockwise to decrease.
18. ECHO DELAY knob
– Use this knob to increase/decrease the level of delay present in the echo effect. Delay is a func
-
tion of the echo effect that controls the interval time between each echo repetition. Turn clockwise to increase, and coun
-
terclockwise to decrease.
19. ECHO LEVEL knob
– Use this knob to increase/decrease the amount of echo applied to all channels (1-3). The echo
level controls repeat and delay levels, as they are part of the echo effect. Turn clockwise to increase, and counterclockwise
to decrease .
20. ECHO REPEAT knob
– Use this knob to increase/decrease the level of repeat present in the echo effect. Repeat is a
function of the echo effect that controls the number of echo repetitions that occur before the sound fades completely fades
out. Turn clockwise to increase, and counterclockwise to decrease.
21. REVERB LEVEL knob
– Use this knob to increase/decrease the amount of reverb applied to all channels (1-3). Turn
clockwise to increase, and counterclockwise to decrease.
22. LCF CONTROL knob
– Use this knob to increase/decrease the amount of high frequency (sibilance) found in the audio
signal when using DSP effects. Set to ‘0’ for minimum sibilance and set to ‘10’ for maximum sibilance.
23. EFFECT ON/OFF button
– Use this button to quickly enable/disable DSP effects to all channels (1-3).
24. EQ 63Hz – 12kHz knobs
– Use these knobs to customize the sound of the master output (channel 1-3). Turn clock
-
wise to increase, and counterclockwise to decrease.
+63Hz
250Hz
1kHz
3.5kHz
-10
-5
0
+3
+6
12kHz
MAIN
OUT
MAIN
IN
MASTER
VOLUME
POWER
ON
N
A
M-
E
G
AT
S
FX
TOGGLE
FOOT
SWITCH
EQUALIZER
EFFECT
EFFECT
EFFECT
LEVEL
LEVEL
LEVEL
Effect Level
Echo Delay
Echo Level
Echo Repeat
Reverb Level
LCF Control
MIC/
(XLR/ 1/4 )
LOOP
LOOP
SD
PLAYBACK
ROUTE
TO MAIN EQ
TO CH 3
CH 2
ANT
DIGITAL SD RECORDER
CH 1
ANT
LOOP
MIC/
(XLR/ 1/4 )
EFFECTS
SLEEVE
SEND
RETURN
SLEEVE
SEND
RETURN
SLEEVE
SEND
RETURN
CH
1
CH
2
CH
3
1 2
3
CH 1
CH 2
+12
-12
0
+12
-12
0
+12
-12
0
+12
-12
0
+12
-12
0
OPTIONAL ACCESSORY
OPTIONAL ACCESSORY
REC PLAY POWER
REC
VOL
VOL
PLAY/STOP
REC
PLAY/STOP
SDR-3
DIGITAL SD RECORDER
SDR-3
DIGITAL SD RECORDER
PREV
NEXT
PREV
NEXT
REC
SD
SD
PLAY POWER
13
14
15
16
17
18
19
20
21
22
23
24
