VOGELS TVB 2200, Mounting Instructions

*a

*b

*a

*b

*a

*b

Wiring recommendations

14

WIRING RECOMMENDATIONS

Important recommendation: first make a test arrange-
ment with the A/V equipment, connecting all the 
cables. Check that everything is working correctly.
This will show you which cables need to be fed 
through the support.
Mounting the support with the cables fed through
does require a little extra effort, but the result makes it
all worthwhile!

A) Wiring recommendations for TV 
support without accessories
The minimum length from the TV (*a) to the bottom
edge of the wall cap (*b) for all cables which are fed
through the TV support is 110 cm/44 inches.
Add the distance from the bottom edge of the wall
cap to the nearest socket to the lenght of the cables.
The maximum thickness of each cable is 
8 mm/0.31 inches.

B) Wiring recommendations for TV support with a
TVA 2047 or TVA 2048
When using the TVA 2047 or TVA 2048, it is best to
plug the cable directly from the TV to the piece of
equipment underneath. In this case, the minimum
length of the cable is 60 cm/23.6 inches.

The minimum length from the TV (*a) to the bottom
edge of the wall cap (*b) for all cables which are fed
through the TV support is 110 cm/44 inches.
Add the distance from the bottom edge of the wall
cap to the nearest socket to the lenght of the cables.
The maximum thickness of each cable is 
8 mm/0.31 inches.

C) Wiring recommendations for TV support with a
TVA 2046
In this case, all cables are fed through the TV support,
including any scart and loudspeaker cable.
The minimum length from the TV (*a) to the bottom
edge of the wall cap (*b) for all the wiring which is to
be fed through the TV support is 110 cm/44 inches.
This would make the length of the scart cable 
155 cm/61 inches.
Add the distance from the bottom edge of the wall
cap to the nearest socket to the lenght of the cables
(with the exception of the scart-cable).
The maximum thickness of each cable is:
8 mm/0.31 inches.

D

D