9
Selecting modes
•
Press the SOURCE button on the Soundbar repeatedly
or press the HDMI 1 / HDMI 2 / ARC / BT (Bluetooth) / OPT
(Optical) / AUX / MP3 buttons on the remote control
to select the desired mode. The selected mode will be
shown on the display.
Note!
•
When the HDMI ARC socket of the Soundbar is
connected to the HDMI ARC socket of the TV via the
HDMI cable and the CEC function on the TV is
activated in the setup menu of the TV, SOURCE selection
will automatically switch to ‘TV ARC’ (SoundMount).
Adjusting Super Bass Boost
•
Press the BASS + / BASS– buttons on the remote control
to adjust the bass boost level from –3 to +3.
> The selected BASS level will automatically stored per
source.
Adjusting the treble level
•
Press the TREB + / TREB – buttons on the remote control
to adjust the treble level from –3 to +3.
> The selected TREBLE level will automatically stored per
source.
Adjusting the volume
•
Press the VOL + / VOL – buttons on the Soundbar to
adjust the volume.
•
Press the MUTE button on the remote control of the TV to
turn the sound off.
•
Press the MUTE button on the remote control of the TV
again or press the VOL+ button on the Soundbar to
resume normal volume.
Selecting the equaliser
•
Press the EQ button on the remote control to select
equalizer setting MOVIE or SPEECH.
> After switching OFF and ON, the equalizer setting will
automatically return to MOVIE mode.
Adjusting the brightness of the display
•
Press the DIM+ / DIM- button on the remote control to
select brightness level.
> The selected BRIGHTNESS level will automatically
stored.
Setting the Sleep Timer
Use the SLEEP TIMER to turn the system off after a certain
number of minutes in PLAY mode. By setting the SLEEP
TIMER, you can fall asleep to music and know that your
system will turn off by itself rather than play all night.
1
In ON mode, press the SLEEP button on the remote
control repeatedly to select your desired number of
minutes. The number of minutes will be displayed in the
following sequence:
SLEEP 120 - SLEEP 90 - SLEEP 60 - SLEEP 30 - SLEEP 15 -
SLEEP 00.
2
Stop pressing the SLEEP button when your desired
number of minutes is displayed.
> The Sleep Timer is now set.
3
To cancel the SLEEP TIMER, press the SLEEP button
repeatedly until ‘SLEEP 00’ is displayed.
5. AUX/MP3 LINK/OPTICAL/
HDMI OPERATION
1
Make sure that the audio device is connected to the
Soundbar.
2
Press the SOURCE button on the Soundbar repeatedly
or press the HDMI 1 / HDMI 2 / ARC / OPT (OPTICAL) /
AUX / MP3 buttons on the remote control of the Sound-
bar to select the desired mode.
3
Operate your audio device directly for playback
features.
4
Press the VOL + / VOL – buttons on the Soundbar to
adjust the volume to your desired level.
Note!
•
You may need to switch to lineair PCM (Pulse Code
Modulation) output on your source device (for example
TV, DVD or Blu-ray player) while the Soundbar is swit-
ched to OPTICAL or HDMI mode.
•
A/V peripherals must be connected to the TV.
6. PLAY WITH BLUETOOTH DEVICE
You can listen to tracks from a media device if connected to
the Soundbar via Bluetooth.
6.1 Pair Bluetooth enabled devices manually
The first time you connect your Bluetooth device to the
Soundbar, you need to pair your device to the Soundbar.
CAUTION!
•
The operational range between the Soundbar and the
device is approximately 8 metres (without any object
between the Bluetooth device and the Soundbar).
•
Before connecting a Bluetooth device to the Soundbar,
ensure you know the device’s capabilities.
•
Compatibility with all Bluetooth devices is not
guaranteed.
•
Obstacles between the device and the Soundbar can
reduce operational range.
•
If the signal strength is weak, your Bluetooth receiver
may disconnect, but it will re-enter pairing mode
automatically.
6.2 Connect your device to the Soundbar via Bluetooth
1
Switch the Soundbar ON.
2
Press the SOURCE button on the Soundbar repeatedly
or the BT button on the remote control to select BT
(Bluetooth) mode.
> The Display shows ‘BT’, then ‘NO BT’ (if there’s no
Bluetooth device connected).
3
Press the PAIR button on the remote control for a few
seconds to activate Bluetooth pairing.
> The Display shows ‘PAIR’.
4
Activate your Bluetooth device and select the SEARCH
mode.
> ‘Vogel’s SoundMount’ will appear on your Bluetooth
device list.
5
Select ‘Vogel’s SoundMount’ and enter ‘0000 for the
password, if necessary.
> The display shows ‘BLUEPORT’ when the connection is
successful.
•
To disconnect the Bluetooth function, switch to another
function on the Soundbar or disable the function from
your Bluetooth device.
