RISE
5105/5108/5205/5208/5305/5308
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
Important Safety Information - GB
Important safety information for both
installer and user
Installer: Before starting the installation
read the safety instructions, the mounting
regulations and rest of this product
manual carefully. Failure to read, thoroughly
understand, and follow all instructions can
result in serious personal injury, damage to
equipment, or voiding of factory warranty!
It is the certified installer’s responsibility to
make sure all mounting systems/accessories
are properly assembled and installed using
the instructions provided. User: Please
carefully read the below safety
information and user manual (if included)
before using the height adjustable mount or
trolley. This ensures a failure-free working unit
and avoids accidents.
Electrical Safety
Connect unit to a properly grounded outlet
only. Make sure, the unit can be
immediately separated from the power
outlet. Only use unit in dry rooms, protect it
from water and other liquids. Only wipe unit
with dry cloth. Do not open lift unit. RISK OF
ELECTRIC SHOCK. There are no serviceable
parts inside. In case of dysfunction unplug
unit from power outlet and call an
authorised technical service person. Do not
overrun line cord or damage it in any other
way. Replace damaged line cords
immediately with new identical ones.
Mechanical safety
Assure installation of unit by authorized
service person only. Only use original
mounting parts provided with the system
and do not use attachments not
recommended by the manufacturer. Do
not improperly load unit: For the max. load
of unit please refer to the page with the
specification sheet in this manual. Do not
exceed: Use with heavier screens may result
in instability causing tipping over resulting in
death or serious injury! The height adjustable
feature of this unit will not function properly
if the weight exceeds the given maximum
load. Use this mounting system only for its
intended use as described in these
instructions. Do not hang on unit. VERY
HEAVY UNIT. Severe risk of injury when unit
tips over due to improper usage.
The socket connections of the unit and
the wall socket must be easily accessible.
Disconnect mains plug before moving the
product.
Always keep product’s motion path free
from obstacles. Before moving the unit up or
down assure at least a safety distance of
20 cm/ 7.9 inch from any part of the unit
to any other fitment in order to avoid
shear traps or squeezing points. In case of
accident please release operating panel.
Movement of unit will stop immediately.
Anti-Collision – Function and intended use
Collision detection is a system to detect
contact between the display lift system and
an object, in order to mitigate the effects of
the impact.
This collision detection system is intended
for protection of the display lift hardware,
however is explicitly not intended as a safety
mechanism to prevent personal injury.
Does your unit have wheels?
Only operate unit on wheels on plane and
stable floors. Move unit on plane floors only.
Risk of tilting when overrunning
floorunevennesses, door sills and similar.
VERY HEAVY UNIT. Severe risk of injury when
unit tips over.
Lock brakes of front wheels when
operation unit. Always move your trolley
with the screen in the lowest position.
The unit is not dripping or splash water
protected. Do not place objects filled with
liquids on or spray the unit. To reduce the
risk of electric shock: Always unplug the unit
from the electrical outlet before cleaning.
Mounting regulations WARNING
A correct mounting is extremely important and this is not the responsibility of Vogel’s Products. Faulty mounting may
result in injury to persons or damage to equipment. Vogel’s Products will not be responsible in any way if the product
has been mounted incorrectly.
Mounting fittings are not included with the product for reasons of safety, since the properties and bearing strength of
walls/ceilings are specific for each case. Suitable mounting fittings must be selected based on the material of the wall/
ceiling.
Obtain advice from a specialist in the field or from a specialist shop concerning the choice of mounting fittings. It is the
responsibility of the installer to ensure that the wall/ceiling can support at least four times the combined weight of the
screen/projector and bracket. The maximum load for this product is given in these mounting instructions. The
instructions for installation and use of the screen/projector must also be followed with respect to the location and
attachment of the screen/projector.
In case of technical issues please contact you installer
2
