TVM 3210/3410/3610 Series - English
21
‘My wall screws have
snapped!’
You might not be drilling
deep enough… or your drill
could be too blunt, so that
the hole is too narrow and
the screw gets stuck.
Use another hole in the wall plate to fix the
wall mount to the wall. Make sure you use
a sharp drill of the correct size. Use the
size of the screw as indication of the depth
to be drilled.
‘My cover is stuck!’
If the space between your
wall and your wall mount is
a little too tight, things can
get tricky to reach.
Push a small screwdriver between wall and
wall mount to push the snap hooks down to
release.
