05TA Service Manual
OPTIONS AND ACCESSORIES
8/13/01
10-9
CHANGING THE SETUP VALUES
Several operating parameters of the machine can be modified. The set up screen must be accessed to
make any modifications. The set up screen can be accessed by pressing the “C” button on the
operator interface. When in the setup screen the interface will display the information shown below.
The arrow buttons can be used to scroll through the lines of the screen.
RUN TIME #####0
TCYCLES ######
C=EXIT SETUP
B=MONITOR SCRN
A=MORE SETUP
CNV DELAY####SEC
CNVYR RUN####SEC
BLOWDOWN ###SEC
HARVEST ###SEC
P18FXT
SET-UP SCREEN
To change the value of a variable, scroll to that variable on the screen, press the “SET” button on the
interface, enter the new value using the numeric key pad and press “ENTER”. The only variables that
can be changed from this screen are the harvest time, blowdown time, conveyor run time, and
conveyor delay time. The last two lines of the display report total cycles and run time of the machine.
Pressing “A” on the operator interface while in the set up screen will allow you to access a second set
up screen where the autostart and the timed freeze cycle features can be turned on or off. The display
will be as shown below.
C-SET-UP SCREEN
B-AUTOSTART OFF
A-TIMEDFRZ OFF
FRZ TIME ##:##
Pressing “A” from this screen will toggle the timed freeze feature from off to on. If the display reads
“A-TIMEDFRZ ON” the timed freeze feature is active.
Pressing “B” from this screen will toggle the auto-restart feature from off to on. If the display reads
“B-AUTOSTRT ON” the automatic restart feature is activated.
The user can also set the freeze time from this screen.
PLC (Programmable Logic Controller)
MONITORING FUNCTIONS
Summary of Contents for TUBE-ICE 05TA
