11
IMPORTANT
BULB REPLACEMENT
The bulb must be replaced by the manufacturer, its service
agent or similarly qualified persons.
Always switch off the electricity supply before carrying out any
operations on the appliance. When handling bulb, make sure it
is completely cool down before any direct contact to hands.
When handling globes hold with a cloth or gloves to ensure
perspiration does not come in contact with the globe as this
can reduce the life of the globe.
LED LIGHTS
• Before changing the lights, make sure that the appliance is plugged off.
• Protect against danger when changing lights, such as wearing gloves.
Changing the lights:
• Remove the grease filter.
• Use a straight screwdriver to slightly prize up the LED light edge and carefully pull out the
LED light, then replace with a new one. See pic below.
• Apply the reverse procedure to install the light back.
• ILCOS D code for this lamp is: DSR-1.5/65-S-64
– LED modules, self- ballasted – round lamp
– Max wattage: 2x1.5W
– Voltage range: DC 12V
– Dimensions:
