Internal clean
Cleaning impeller and volute should be completed by professionals.
Clean the impeller and volute inside
and outside with a soft brush with
neutral detergent, and then install it
in reverse order.
First, unplug the power plug, remove
the machine and place it in a reliable
position, remove the decorative cover
and set screw.
screw
Remove the decorative cover
Remove the screws on the frame
cover and remove the frame cover.
Remove the screw from the volute and
the nozzle, and remove the inlet wind ring.
Inlet wind ring
Nozzle
Turn the lock nut and remove
the impeller in the direction of
the motor shaft.
Impeller
Impeller
lock nut
1
2
3
4
5
6
2
3
4
5
6
7
8
9
10
11
12
