7
Lighting and its replacement
4.
When the refrigerating chamber door opens, the LED light turns on.
When the light is damaged, please remove the lampshade first and then
replace the LED light.
The specific operations are shown in the following diagram:
1. Please move the lampshade and the thermostat out 3-5mm in the direction of
the arrow.
2. Take out the lampshade and thermostat downwards.
3. Pull the connection terminal, use the screwdriver to remove the LED light
board and replace it.
The appliance should be maintained and cleaned frequently. For your safety,
please pull the plug out of the socket before the cleaning.
Interior maintenance
Clean the interior of the appliance with clean water or neutral abluent.Scour it with
clean water and wipe it with a piece of dry cloth.
Maintenance of door gasket
It is easy to get damaged if the door gaskets are polluted by the stain like oil, sauce and
etc., so clean it with care.
Outer maintenance
Wipe the dust with a piece of dry cloth, clean it with neutral abluent of necessary.
MAINTENANCE
1.
2.
3.
DEFROST
Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer
Defrosting of refrigerator will be executed automatically while the product is operating,
so it is not required for manual defrost. The defrost water flows into the vaporization
plate and will be vaporized by the heat of compressor. so its drain tube must be cleaned.
Warning
Note:
If the LED lamp is abnormal, it should be replaced by professionals.
Do not dismantle and replace it privately in order to avoid damage.
