4
OPERATION
Start operation
1. CLEANING THE COMPARTMENT
Before power on, clean inside of the appliance and check the
drainage pipe in good connection. (For details, please refer to the “Maintenance and Cleaning”)
2. PLACEMENT BEFORE
Powering on, level the appliance on the firm & dry floor for at least 30 minutes.
3. POWER ON
The appliance start operation and it will cool down inside after 1 hour, otherwise you
should check the power connection.
ON/OFF
1. Keep pressing the key 3 seconds, power down, goes to stand-by mode.
2. Keep pressing the key again 3 seconds to return back to normal working.
LIGHT
Press the key, turn on or turn off the LED lights inside. In stand-by mode, the key is invalid.
UP
Press the key once, LED Display in regular flash showing current set temperature. Continue pressing to adjust
set temperature, one press increase 1°C. Regular flash quit after 5 seconds detecting no press and new set
temperature saved. LED display return to show actual temperature inside.
Down
Press the key once, LED Display in regular flash showing current set temperature. Continue pressing to adjust set
temperature, one press reduce 1°C. Regular flash quit after 5 seconds detecting no press and new set temperature
saved. LED display return to show actual temperature inside.
lid.
Child Lock
Combination key.
1. Lock：Press both keys at the same time for 3 seconds to lock.
2. Unlock：Press both keys at the same time for 3 seconds to unlock.
CONTROL PANEL
