-6-
Installation Instructions
2
DISHWASHER CONNECTION IF REQUIRED
(
)
If you are connecting to a dishwasher, complete the following
step. If a dishwasher is no t to be connected go on to
"Attaching the Discharge Elbow" section.
1
K NOCK OUT P LUG
Using a blunt instrument steel punch or wooden
dowel knock out entire plu g Do not use a screwdriver
or sharp instrument When knockout plug falls into
disposer you may remove it or simply grind it up when
the disposer is used This will not damage the
disposer in any way but may take some time to grind
over the course of several uses
(
),
.
.
,
.
,
,
.
Knock out plug
1
K NOCK OUT P LUG
2
C ONNECT HOSE
Connect the dishwasher hose using a hose clamp If
the hose size is different you will need a stepped
rubber adapter
.
,
.
Hose Clamp
Stepped Rubber Adapter
3
ATTACHING THE DISCHARGE ELBOW
CONNECT DISCHARGE ELB OW
*
.**
.
Connect the discharge elbow to the disposer
Make sure all plumbing connections are tight
Discharge
Elbow
Rubber
Gasket
* Discharge elbow must be installed by a professional.
** Some installations (see page 8 for examples) may
require the use of a flexible drain pipe.
If the dishwasher connection is made without
removing the plug, the dishwasher may overflow.
NOTE:
