Page 11 of 14
Manual LA-Stick 4x4 - 2018-07 EN
LA-Stick 4x4 in flight operation
Using flight mechanics, up to four LA sticks can be flown under each
other on ceilings and trusses.
Assembly and alignment of the flight mechanics
1.
Use the M10 clamping lever (4) to attach the flight mechanic to
the LA-Stick. To do this, first remove the M10 x 25 mm hexa
-
gon socket screw on the back of the LA-Stick (A).
2.
Connect the two parts of the flight mechanics with each other
with the aid of the locking pins and the ball locking pin (3).
3.
The small U-bracket (1) can be mounted directly on the ceiling,
or e.g. on the universal suspension device for flight mechanics
or the self lock clamp.
4.
Align the flight mechanics by fixing the U-bracket on the upper
hole rail (2) with the ball locking pin. How the center of gravity
behaves depends on the number of LA-Sticks attached to the
flight mechanics.
Safety points in flight operations
1. You can use any free M6 threaded point on the back for an M6
x 30 mm (7) eyelet.
2. If several LA-Sticks are connected to each other with the spind-
le mechanics, you can pass the safety catch rope under the ball
locking pin (5) and attach it to the safety point of the bottom
LA-Stick (7). The top LA-Stick is then secured.
3. Users who frequently switch between tripod and flight operati
-
on can also use the tiltable stand adapter (6) as a safety point
with the aid of a 6 mm chain link after you have carried out the
safety catch rope under the ball locking pin (5).
Note: The M10 threaded points at the top and bottom of the
housing must not be used as securing points. In case of over-
stress, the bottom or cover of the housing may break off!
Flight operation at truss clamp
max. load: Four LA-Sticks with spindle mechanics.
1. Remove the M10 countersunk screw (A) and mount the cross-
head clamp. The clamp should be provided for countersunk
screws so that the crosshead clamp can be tightened firmly in
the desired position.
We recommend it:
■
Ultralite Half Coupler M10, black, Code: KCP-831B
■
Ultralite Half Coupler M10, silver, Code: KCP-831
Working with LA-Stick 4x4
1
2
4
3
5
6
7
A
A
