Page 8 of 14
Manual Modular-10 - 2018-07 EN
Working with Modular-10
Forming a Array
The standard horn is 90° x 40°. If two Modular-10s are to be used side by side in an array, the horn must be
rotated to avoid interference.
Note: The two loudspeakers are always joined together on the side walls with the largest contact surface. So
that the handles are inside and the bass ports outside.
Modular-10 in array with horn 90° x 40° (v x h) interference occurs
Modular-10 with rotated horn 40° x 90° (v x h) Interference minimized
40°
90°
90°
40°
Horn 90° x 40° seen from front
To turn the horn, remove the M5 x 16 mm cylinder head screws with which the horn is fixed. Then turn the horn
with driver by 90° and screw it on again.
