Page 5 from 12
Manual Voice-Acoustic PA-Tower - 2019-02 EN
Introduction
Components
1. Head section made of aluminium
2. Tower-Base
3. Cross bar short on plug-in feet in front
4. Cross bar long on plug-in feet in front
5. Double rear plug-in feet
6. Long plug-in feet in front
7. Hinge Element
8. Gala clip-on feet
9. Assembly aid
10. Winch section
Note:
The assembly aid (8) and winch section (9) are included depending on the mounting variant. The as-
sembly aid is only required once and can be used for several PA towers.
Technical data
Construction height
4.9 m
Lifting height
4.7 m
Load capacity
Indoor without dynamic load up to 400 kg / Outdoor max. 300 kg
Floor area
133 (w) x 165 (d) cm / 140 (w) x 174 (d) cm with Gala clip-on feet
Ballasting
Recommendation: With indoor or operating wind a minimum ballast 60 kg
Stability
up to max. wind force of 15 m/sec with max. 1.5 m² wind attack area
1
6
2
8
7
5
3
4
9
10
