Page 6 of 10
Manual Paveosub-218 - 2018-07 EN
Introduction
Technical data
Components
2 x 18“ Neodym long excursion woofer (LF) with 4“ voice coil
Lower cut-off frequency
32 Hz (- 10 dB)
36 Hz (- 3 dB)
Coverage range (h x v)
Omnidirektional
Powerhandling
2.400 W AES / 4.800 W program / 9.600 W peak at 4 Ω
Sound pressure
136 dB SPL AES / 139 dB SPL program / 142 dB SPL peak
Dimensions / Weight
600 (h) x 1.160 (w) x 770 mm (d) / 80,5 kg
Finish
Polyurea coating in RAL 9005 / Warnex textured paint
Connections
The loudspeaker has four loop-through Neutrik NL4 SpeakON
®
IN/OUT connectors. They use the 2+/2- connec-
tion pins. Additional loudspeakers can be looped through via the second connector. In addition to the rear
connector panel, two front SpeakON
®
connectors are available in the front grille.
The configuration of the front SpeakON
®
connectors can be changed from standard 2+/2- to 1+/1- on a board
behind the front grille, so that cardioid bass arrays can easily be looped through with a 4-pole cable.
