Page 10 of 13
Manual Score-5 - 2018-07 EN
Installations with truss clamp adapter
Attach the truss clamp adapter to the wall, ceiling or floor using
suitable fixing materials.
Installation with truss clamp at the rear and adapter horizontally on
the wall, or upside down on the ceiling.
1. Use an M8 x 15 mm threaded screw and washer to mount
the truss clamp to the M8 threaded point on the rear of the
loudspeaker.
2. Hang the loudspeaker into the adapter.
3. Adjust the tilt.
4.
Tighten the wing nut again to fix it.
Installation with L-bracket with truss clamp and adapter on the cei-
ling or standing.
1. Hang loudspeakers with L-bracket into the adapter.
2. Adjust the tilt.
3.
Tighten the wing nut again to fix it.
Installation using universal suspension device for flight mechanisms,
L-bracket with truss clamp and adapter on high ceilings.
1. Mount the truss clamp at point (A) of the L-bracket.
2. Attach the truss clamp adapter to the universal suspension
device (B) using suitable fastening material.
3. Hang loudspeakers with L-bracket into the adapter.
4. Adjust the tilt.
5.
Tighten the wing nut again to fix it.
Flight operation with suspension arrangement
1. Use an M8 x 15 mm threaded screw and washer to mount
the truss clamp to the M8 threaded point on the rear of the
loudspeaker.
2. Hang the loudspeaker with the clamp into the suspension de-
vice (C).
3. Adjust the tilt.
4.
Tighten the wing nut again to fix it.
Working with Score-5
C
B
A
