background image

Page 4 of 13

Manual VENIA-6 - 2021-11 EN

General Safety Instructions:

Loudspeakers produce a static magnetic field even if they are not connected or are not in use. Therefore make 

sure when erecting and transporting loudspeakers that they are nowhere near equipment and objects which 

may be impaired or damaged by an external magnetic field. Persons with cardiac pacemakers must maintain a 

safe distance.

The minimum recommended safety clearance is 1 m.

Never stand in the immediate vicinity of loudspeakers driven at a high level. Professional loudspeaker systems 
are capable of causing a sound pressure level detrimental to human health. Seemingly non-critical sound levels 
(from approx. 90 dB SPL) can cause hearing damage if people are exposed to it over a long period.

All connected cables must be laid in such a way that they cannot be crushed by objects and that nobody can 
step on them! Replace damaged cables immediately and do not use them!

Use only accessory parts specified by Voice-Acoustic or original accessory parts from Voice-Acoustic. Check all 

cabinets and accessories regularly for wear and replace them if necessary.

Do not set up the loudspeakers in places where they are permanently exposed to moisture, dust, dirt or direct 
sunlight.

Care

Wipe the surface of loudspeakers only with a damp cloth and pure water. In case of heavy pollution, repeat the 
above procedure several times if necessary. Do not use any chemical additives or aggressive detergents, as 
these may harm and damage the surfaces.

Transport and storage

When transporting and storing the unit, it is important to ensure that the surface and front grill of the loudspe-
aker are not damaged. Moisture can penetrate through exposed wood surfaces and cause the wood to swell. 
A bent or broken front grill will no longer adequately protect the sensitive speaker membranes. In addition, 
appreciable dust deposits may considerably impair the functionality of a loudspeaker membrane. For this rea-
son, the loudspeakers should be transported and stored in a safe, careful, dry and largely dust-free manner.

The following accessory parts for transport and storage are available from Voice-Acoustic:

 

Carrying bag for 1 x VENIA-6 (Art.-Nr. 504602000)

 

Heavy-duty flightcase for up to two 2 x VENIA-6 (Art.-Nr. 504603000)

Note:

 The original packaging is unsuitable as permanent storage and transport packaging!

Warranty

The warranty period is 24 months from date of delivery.

On our choice we will eliminate any lack of conformity with repair or with replacement of the faulty goods. The 
place of performance for warranty services is Voice-Acoustic headquarters in Dörverden. In case of remedy of 
defects, the buyer shall bear all costs resulting from transportation of the goods to Voice-Acoustic headquarters 
in Dörverden.

The ordering party is not entitled to remedy the defect by itself or to organise a replacement and to charge 
such activities to Voice-Acoustic. In case of self remedy by the ordering party the warranty given by Voice-
Acoustic becomes void.

Warranty doesn’t apply to parts of wear and tear, such as threaded points, Camlock connectors and  
the SpeakON

®

 connectors.

Introduction

Summary of Contents for VENIA-6














Reviews: