3.
Installation
Connecting the USB adaptor to your computer's USB port is a simple and
complete plug & play process. The installation in completed with no CD
ROM, as there is no software to install.
4.
Operation
In-line Microphone mute button:
When you push the microphone mute
button while recording, dictating or speaking live, the other party will no
longer hear your voice. When muted the indicator LED will flash
continuously. Pressing the button again will un-mute the microphone and
the LED will cease flashing.
In-line receive (speaker) mute button:
When you push the receive mute
button while speaking or pausing in conversation, you will no longer hear
the other party's voice or sound. Your microphone will continue to transmit.
Press the receive mute button again to
Un-mute.
In-line receive volume control:
Adjust the digital receiver volume control up
or down to suit your personal preference.
5.
General USB troubleshooting in Win 98, 98SE and ME
This information applies to :
!
Microsoft Windows Millenium Edition
!
Microsoft Windows 98 Second Edition
!
Microsoft Windows 98
Because USB devices are plug and play, there is little that you can do to
control or configure them. However, you can trace most USB problems to
one of the following conditions:
1. Malfunctioning or incorrectly configured hardware
2. Malfunctioning, incorrectly configured or missing device driver
3. Mismatched cabling
4. Out of date firmware or basic input/output system (BIOS)
5. Improperly configured root hub
6. Further USB assistance