7
number of beeps corresponding with the
channel you want to name. Then press and
hold the CHAN button until the red LED
comes on. While the red LED is on, speak your
channel name then release the CHAN button.
When you release the CHAN button the unit
will immediately play back the name you have
just recorded. If you want to change the name,
press and hold the CHAN button and record it
again.
To record a message on a channel —
Press
and release the CHAN button until you hear
the name of the channel you want then use the
RECORD button as normal.
To play a message on a channel
— Press and
release the CHAN button until you hear the
name of the channel you want, then use the
normal play procedure. The skip
and
buttons will skip between messages in that
channel.
To erase a message on a channel —
PLAY the
message you want to erase, then press and hold
Erase LAST until the red light blinks twice.
Summary of Contents for VT-300
Page 1: ...Instruction Book Voice It Personal Note Recorder Model VT 300 ...
Page 14: ...14 ...
Page 15: ...15 ...
