background image

DATA FILER

 8. SYSTEM UTILITIES

121

The system utilities, found in the TOOLS section of the front panel, are accessory functions
not closely linked to the playback and recording of songs, but which are a useful backup to
the operations the Genius offers.

Unlike the functions in the REAL TIME ADJ. section, the TOOLS can only be recalled in Stop
condition.
The only exception is the PART INFO function described in point 8.5.
The TOOLS section is divided into five sections corresponding to the buttons on the panel,
as follows:

o

DISK: access to the general disk and internal memory functions (formatting, copying whole
floppy disks, etc....).

o

FILES: accessory functions relating to the files (single and multiple copy, delete, rename,
etc...).

o

MIDI: settings relating to the instrument’s general MIDI functions (Out Router, MIDI filters,
synchronisation, etc...).

o

SYSTEM: accessory functions relating to the system (display, pedal control, etc.).

o

PART INFO: information about the status of the main data relating to the tracks being
played.

8.1 DISK

When the [DISK] key in the TOOLS section is pressed, the display will show:

The functions available are:

o

FORMAT

: selected by pressing the [F1] key, starts the procedure for formatting the disk

inserted in the floppy disk driver, or the internal flash memory.

o

QUICK F

 (Quick Format): [F2], starts the procedure for quick formatting of the floppy

disk.

o

FILE SORT

: [F3], recalls the function for sorting the files contained in the selected unit.

o

FD LABEL

 (Floppy Disk Label) [F4], can be used to change the label of the floppy disk

inserted.

o

FD COPY

 (Floppy Disk Copy): [F5], recalls the procedure for copying a whole floppy

disk onto another or into the internal memory.

o

INFO

: [F6], displays the main informative data about the floppy disk inserted or the internal

memory.

Summary of Contents for genius





































































































Reviews: