DATA FILER
The selected List does not contain any assigned steps or the first step is empty. Check the
contents of the List using the operations for modification of the existing List (point 10.4).
SONG NOT FOUND
After this, scroll through the steps present using the encoder. To modify an assignment created,
press the [F4] key and use the DIRECTORY function to create the new assignment.
You can also use the INSERT and DELETE functions to add or delete steps (see point 10.1).
Now save the List (point 10.2) bearing in mind that if the original name of the List is retained
the List will be overwritten. Here again, if the modified List is saved in the internal memory, it
will be placed at the end of the sequence of existing lists.
10.5 LIST FILE MANAGEMENT
This manual has shown us how to copy, rename and delete song files (*.MID files). The same
procedures are also identical for the List files made available during this operation by pressing
the [LIST] button in the MODE section. Press [SONG] in the same section to return to
management of the *.MID files.
178
None of the songs in the List is found to be present in the system (e.g. they have been deleted
after creation of the List). It is also possible that the contents of the List refer to a floppy disk
with no disk or the wrong disk present.
10.4 MODIFYING A LIST
To modify an existing List, select it in the MAIN PAGE and load it into the performance memory
by pressing the [ENTER] key. Then press the [LIST] button in the EDIT section to display its
contents.
