RD-80e
DATA FILER
Once the synchronisation message has been selected, use the [FF] (Enable) button to
enable its reception or [REW] (Disable) to disable it. A message is transmitted when three
dots are shown on the display.
The display is similar for the other synchronisation messages.
•
Clock: enables/disables transmission of the internal MIDI Clock of the RD-80e to the
[MIDI OUT] port. When the function is active, it will be possible to synchronise the
tempo of another device, connected to the [MIDI OUT] port and set for reception of the
message in question, with that of the RD-80e.
•
Commands: enables/disables transmission of the MIDI Start, Stop and Continue
messages. With the function active, when the [PLAY], [STOP] and [PAUSE] buttons
are pressed, the RD-80e will transmit the relative message to the [MIDI OUT] port.
•
Song Select: enables/disables transmission of the MIDI message for selection of the
active song. When the function is active, if a song is selected with the RD-80e the
relative message will be transmitted to the [MIDI OUT] port (when the [ENTER] key is
pressed).
•
Song Position Pointer: enables/disables transmission of the MIDI message for pointing
the bar of the selected song. With the function activated, when a bar is selected by
means of the [REW] and [FF] keys, the RD-80e will transmit the relative bar reached
message to the [MIDI OUT] port.
When the operation is complete, the [ESC] key can be pressed to exit from the video page
in question; all the modifications will be saved automatically. On exit from the function, the
current song will be reloaded to implement the modifications.
77
