RD-80e
DATA FILER
The instrument will then write the data on the floppy disk, showing on the display:
At the end of the operation the following video page will appear:
to indicate that the procedure has been completed successfully.
CAUTION!
You are urged to take special care when extracting and inserting the disk; this must
only be carried out when the instrument gives the relative prompt. This is because it
takes a short time for the drive heads to reach the safety position.
If the destination floppy disk is inserted before the system gives the prompt, extract the
disk again and wait for the message.
During the reading and/or writing operations, pressing the [ESC] key interrupts copying of
the floppy disk. The display will show the message:
for the time taken to close any files open.
82
