RD-80e
DATA FILER
•
Type: this function allows selection of the type of harmonisation.
•
Harmony Channel: this function allows you to set the MIDI channel on which the HVP
obtains the data for the harmonisation.
•
Lead Channel: use this function to select the MIDI channel by means of which the
auto-tuning of the melody line is carried out (when the Lead mode is activated).
•
Harmony Level: this function allows you to set the level of the voices for the
harmonisation
•
Lead Level: this function allows you to set the level of the voice used for the auto-
tuning of the melody line.
•
Reverb Level: use this function to adjust the level of the reverb effect which simulates
the propagation of the signal inside a room.
•
Delay Level: this function allows you to set the level of the delay effect, more often
known as the
echo effect,
used to obtain repetitions of the signal.
NOTE
These functions can only be recalled if the HVP voice harmoniser is present and properly
installed. Otherwise, the system will show the video page:
meaning “Not installed”.
After selecting the function required, press [ENTER] to access the internal settings.
9.6.1 TYPE OF HARMONISATION
After selecting the Type function (“Typ” video page) you will be able to select the type of
harmonisation you require:
92
