RD-80e
DATA FILER
meaning “Are you sure?”.
Press [ENTER] and the instrument will go ahead with the saving procedure; press [ESC]
and the saving procedure will be aborted.
During the saving procedure the display will show:
and then return to the List selection video page.
To abort the List creation procedure without saving it, press the [LIST] key.
The List file generated by the RD-80e will be placed after any already present on the disk
and named as follows:
__RD_nnn.lst
where
__RD_
is the fixed part of the file name and
nnn
is a consecutive number (i.e. last
file __RD_ + 1). This means that the file generated is always at the end even if there are
other files generated by the RD-80e. For example the first List file generated will be called
__RD_001.lst, the second __RD_002.lst, and so on.
10.2.1 ERROR MESSAGES – SAVE LIST
DISK ERROR
10.2 SAVING THE LIST
During the List creation procedure, the List can be saved on the floppy disk at any moment
by pressing the [REC] (SAVE) key.
The display will then show:
The disk is damaged and it will not be possible to carry out the operation.
95