WWW.VOICEINTEROP.COM
8000 N. Federal Highway, Suite 100, Boca Raton, FL, 33487 V: +1 561.939.3300
AM360r User Manual
revised 2008.07.11 for
Hardware Rev. A
Firmware Version 1.00.20
Login
IP Address
shows the address of YOUR computer from which you are managing this unit.
LAN Port
MAC Address
shows the Ethernet address of the unit’s LAN interface. This uniquely identifies
the unit on your network and can be useful in differentiating among several AudioMate
360 units on the same network.
IP Mode
shows whether the unit received its address from a DHCP server or is configured
with a static IP address.
IP Address
shows the currently assigned IP address regardless of how it was obtained.
Module Status
The Module Status page displays the audio level settings and the state of the various digital
inputs and outputs. Refresh the page to see the current states.
In the menu pane on the left, locate the
Status
heading and click the link
Module
under it.
The screen labeled
AM36r (Radio) Status
should appear in the right pane.
TX Level
and
RX Level
indicate the current setting of the transmit and receive audio levels.
These can be changed in the
Module Configuration
screen.
Talk Mode
when
Active
indicates that voice packets are being streamed to the LAN port.
This can be triggered by the COS input or by setting
Analog Receiver to VoIP Mode
to
ON
to force full-time streaming.
Listen Mode
when
Active
indicates that the LAN port is receiving voice packets addressed
to this unit.
