VOIspeed V-IP400 User Manual
©
VOI
SPEED
L
TD
.
8
OFF the SIP registration is disabled
SIP1 (Private sip server) register Status:
BLINK Registration enabled but the registration procedure fails
ON the telephone is logged in
OFF the SIP registration is disabled
Handset Status Icon:
ON handset is if off hook
OFF if on hook
Speakerphone Status Icon:
ON, the phone is in speakerphone mode
OFF the phone is in idle status or in
…
Weekday Status Icon:
Numerical Numbers and Characters:
0 - 9
* # @
A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z
3.4.3.
Key features
The V-IP400 provides the same functionalities of a traditional telephone. In addition, offers
a wide range of features when connected to VOIspeed.
Please find below a list of the telephone’s key features:
Switch ( supports DHCP or static IP)
Protocols supported: TCP/UDP/IP, HTTP, DHCP Client, FTP
VoIP protocols: SIP (RFC3261)
Voice coding: G.711 (A-law/U-law)
Configurable protocol ports (telnet, HTTP, FTP)
Features supported include: ID caller, Hold, Forward (blind/attended), Do not disturb
(DND), DTMF tones, Quick number (Hotline autodial, etc…)
Show user status (only when used in combination with VOIspeed)
Full duplex speakerphone, redial, call log, adjustable volume
Voice recording (only when used in combination with VOIspeed)
Standard encryption and authentication (DIGEST using MD5)
Telephone manual configuration (from keypad, web interface or Telnet) or up-loadable
from file through TFTP or HTTP
Upgrade via TFTP/FTP or HTTP server
Configurable syslog server
