VOIspeed V-IP400P User Manual Download

Page: 16 / 37

VOI

SPEED

SER

ANUAL

4.4.6 -

Call pick-up

The V-IP400P can be used to pick-up an active call directed to an extension linked to

one of the memory buttons. When an extension starts ringing (flashing amber LED), lift

the handset and press the relevant memory button to pick-up the call. A pre-recorded

voice will ask to replace the handset in order to direct the call to the V-IP400P.

Note

: this feature is only available when the V-IP400P is used in conjunction with a

VOIspeed PBX.

4.4.7 -

Call Recording

Press the

REC

button during an active call in order to record a conversation. The

recording is stored in the user’s vocal box.

Note

: this feature is only available when the V-IP400P is used in conjunction with a

VOIspeed PBX.

4.4.8 -

Speakerphone

Press

SPEAKER

before or during a conversation in order to activate the speakerphone.

4.4.9 -

How to change the volume settings

Press

and

DOWN

buttons during an active call in order to modify the volume. The

relevant level is displayed on the LCD.

4.4.10 -

Text Messaging

The V-IP400P supports SIP text messaging. A new incoming message is displayed

showing the sender’s extension on the first row and the content in subsequent rows.

Press

EXIT

to store the message and exit or

DEL

to erase the message. Press

CALL

LIST

to see the list of saved messages (press

and

DOWN

to browse the list or

DEL

to delete the message). Only 20 messages can be stored in the V-IP400P memory.

When this limit is reached old messages are automatically replaced by new one.

Note

: incoming messages are not displayed in case the LCD is informing the user

that an incoming call was lost.

4.5 -

Memory Buttons M1 – M10

The V-IP400P features 10 memory buttons with associated LEDs. These memory

buttons can be further extended using the V-IP400E expansion module bringing the total

number of buttons to 30. Each button can be linked to an extension with the LED

displaying its status.

Summary of Contents for V-IP400P






































Search results

Summary of Contents for V-IP400P

Reviews:

Related manuals for V-IP400P

Brands by name

Popular brands

VOIspeed V-IP400P, User Manual

Search results

Summary of Contents for V-IP400P

Reviews:

Related manuals for V-IP400P

Brands by name

Popular brands