AdminGuide-Voss12-1.docx
121
C. How to Use FXS
Hook Flash is a function that pressing Hook lightly. For using various feature
related this Hook Flash, should stop pressing within Hook Flash Interval time in
[Basic]/[Line]. Defaulted Hook Flash Interval is 600 milliseconds so if pressing the
Hook longer than 600 milliseconds will disconnect the call.
■
Hold
During a call between A(100) and B(200), if A(100) needs to hold a call with
B(200), then on A(100)’s phone, do Hook Flash, then the call with B(200) will be
on hold. And do Hook Flash once again on A(100)’ phone, the call with B(200)
will be re-connected.
■
Transfer
Blind Transfer
During a call between A(100) and B(200), A(100) has to transfer the call with
B(200) to C(300). Then, do Hook Flash on A(100)’s phone to hold the call with
B(200), and dial 300 and hang up the phone. Then, B(200) will be on hold and
C(300) will be ringing.
If C(300) picks up the phone, B(200) and C(300) will be connected. But, A(100)
will not check whether B(200) ad C(300) are connected successfully.
Attended Transfer
During a call between A(100) and B(200), A(100) has to transfer the call with
B(200) to C(300). Then, do Hook Flash on A(100)’s phone to hold the call with
B(200) and dial 300 on phone A then C(300) will be ringing.
Once C(300) picks up the phone, C(300) and A(100) will be connected to check
whether C(300) is available to transfer the call with B(200). After checking
C(200) is available, A(100) hang up the phone, then B(200) and C(300) will be
connected.
■
Call Parking
During a call, move to another place to continue the call. For instance, during a call
A(100) and B(200), A(100) needs to talk to B(200) in another place such as
C(300)’s desk, do Hook Flash on phone A(100) then press *301(Call parking
number) then server will give available call parking number for instance, *311.
Then, A(100) goes to C(300)’s desk and press *311 then A(100) and B(200) will
be reconnected.
For the Call parking configuration, go to [Advance]/[Feature Code Admin] to set
the call parking.
■
Call Forwarding
Always
If in case of all the receiving calls to A(100) should be received on B(200), on
A(100) press *23200, then all the received call to A(100) will be forwarded to
B(200). And if you want to cancel this feature then press *24 on A(100).
*23 (Set Always Call Forwarding) and *24 (Cancel) can be set on
[Advance]/[Feature Code Admin] menu, Forwarding Config ‘Set Always’ and
