AdminGuide-Voss12-1.docx
15
3.
Web Manager
VOSS12 provides user friendly web interface for easy system management. Before
starting this web manager, be familiar with general set-up environment including
WAN/LAN, extension structure and so on.
Factory default of VOSS12’s LAN port is set as IP address, ‘
192.168.1.10
’, and
Subnet Mask ‘
255.255.255.0
’. And, both Administrator ID and Password are set as
‘
admin
’. Once initial set-up is completed, please change the system’s ID and
Password for security reason.
Note:
While using web manager, if the web manager stops operating, then close
the web browser and re-log-in the web manager. This is because the Flash Player
sometimes stops playing so this is not the IP-PBX system problem.
Set-up PC’s IP Address
In order to access web manager, the PC’s IP address (ex:192.168.1.100) should be
the same domain as default IP address of VOSS12’s LAN port which
is ’192.168.1.10’. Then, connect another end of the cable from VOSS12 LAN port
to PC.
The following shows how to change PC’s IP address. (in case of using Windows
XP)
1)
Go to [Start]/[Control]/[Network Connection].
2)
Go to [Local Area Connection], and click right button of mouse and go to
[Properties].
Figure 3-1. Local Area Connection
3)
Go to [LocalArea Connection]/[General][Internet Protocol(TCP/IP)] and click
[Prosperities].