VolantexRC Ranger600, User Manual

9 / 12

Gyro System Calibration                                                                                    

Wifi Version Instruction                                                                                     

1.Turn the throttle stick to min position.

2.Power on the transmitter and the receiver.

3.Do 

NOT 

unlock the throttle.

4.Keep the sticks as above picture for several seconds.

5.When you hear a “beep” sound, it means the gyro 

system is calibrated based on the horizontal level you are 

keeping it.

1. The Wifi version airplane allows to record by your 

phone memory, and by memory card (not included). 

To record by memory card, insert your memory card 

from the back of the electronic board, make sure it is

secured.

2. Install the phone support parts together as shown

in right photo. Make sure the rod is well stuck in the 

phone support.

3. Install the phone support part to the transmitter with 

the rear lunate part. Tighten the screws from the rear 

lunate part to secure the whole phone support.

4. The phone support is well assembled now. With the

spring you can extend the support to hold different

phone sizes.

Memory Card

(micro size)