Braking
Parking Brake
The parking brake is activated by
turning the orange-coloured lever in
forward direction and lock it by a click.
The brake is released by
turning the lever straight upward until
you hear a clicking sound. See the
sketches.
Travelling Brake
The brake is
activated by
upward
pushing the
bottomside
of the
handles
2 mm
1
2
3
Adjusting the brake to obtain correct function
The braking power can be
adjusted by changing the length
of the wire.
1. Turn up the parking brake.
2. Loosen the locking nut as shown
by the sketch.
3. Slacken the adjusting screw, if you
want to increase the braking power.
Screw home the adjusting screw , if you
want to reduce the braking power.
4. Check the distance between the brake shoe and the wheel. The
distance should be approx. 2 mm. If you adjust the brake too tight the
5. Tighten the locking nut again.
Doability Limited, Unit I7B, Hornbeam Park Oval, Hornbeam Park, Harrogate, HG2 8RB
P 01423 740450, F 0113 3410395, E info@doability.co.uk, W www.doability.co.uk
6
7
Call 01423 740450