Lubricating the Wire
After the cleaning lubricate the braking wire up at the handle and
down at the rear wheel. Lift the travelling brake handle and apply a few
drops of oil on the wire showing above the adjusting screw. Lubricate
also the wire inside the spring at the rear wheel.
Fault Tracing
If the rollator pulls to the right or to the left, check that all wheels
rotate smoothly and that the wheel forks turn easily. Check that wheels
and forks are tightened properly. Make sure that no dirt is gathered
between the wheels and the brake shoes
If the Brake does not work :
to the brake arm.
• Check that, when braking, the brake arm is pressed against the
wheel and there is no dirt between the brake arm and the wheel.
• Adjust the wire.
No or unequal braking action
that the spring at the brake arm is not broken. Check when braking that
the brake shoe is pressed against the wheel, equally on both sides.
Adjust the wire, see page 7.
Maintenance
Cleaning
Leniently remove the dirt using a moist cloth and detergent.
Make sure that no dirt is gathered between the wheels and the
brake shoes. Dirt might jeopardize the braking p
ower.
Flushing from above by means of jet cleaning or a garden hose is
recommended. Wipe dry afterwards.
Doability Limited, Unit I7B, Hornbeam Park Oval, Hornbeam Park, Harrogate, HG2 8RB
P 01423 740450, F 0113 3410395, E info@doability.co.uk, W www.doability.co.uk
10
11
Call 01423 740450
