17
7. TROUBLESHOOTING
PROBLEM
SOLUTION
The RF signal is not
recognized.
Check that your ActivHub
TM
is emitting RF. The blue LED
on the side of the ActivHub
TM
RF will flash 2 times quickly to
indicate that it is emitting RF.
The glasses are blinking
strongly.
Check that there is no other
source using the same RF
channel within a range
of 30 meters around the
ActivHub
TM
RF.
The glasses blink when
I turn them ON
When this phenomenon
occurs, it means that
the battery is low. Please
recharge the glasses.
The EDGE™ RF glasses
are not synchronizing
with the ActivHub
TM
RF50
Verify that the RF channel
selected under the
ActivHub
TM
RF is set to
position “8”. Check that
your original source is
broadcasting 3D.
The EDGE™ RF glasses
stay OFF despite the
fact that I press the
ON/OFF button to turn
them ON
Try recharging your glasses. If
the problem persists, contact
support@volfoni.com
Summary of Contents for EDGE VR VPEG-05010
Page 1: ...www volfoni com model VPEG 05010 User Guide Manuel d utilisation ...
Page 2: ......
Page 23: ...23 ...