8
SmartCrystal™ Cinema Neo
n ° :
MUV160028
Version :
A07
USER MANUAL
Date : 13/09/2017
LED check
5.
There are 4 different LED lights that indicate the following information:
LED number 1:
STATE OF FAN
This LED is blue when the fan is running and red when there is a problem with the
ventilation system.
LED number 2:
STATE OF MOTOR
This LED is blue when the motor is running and red when there is a problem with the
system.
LED number 3:
STATE OF SYNC
This “SYNC” LED operates as follows:
- Once the system is powered (but not synchronized), the SYNC LED will illuminate in red.
The system starts as soon as it is connected to a power source.
- Once the SmartCrystal™ Cinema receives the synchronization signal, the SYNC LED will
illuminate in blue as follows:
•
Blue continuous light: signal for 2D synchronization (less than 96Hz)
•
Blue blinking light: signal for 3D synchronization (greater than 96Hz)
LED number 4:
POWER SUPPLY
This LED is blue when the system is properly powered and off when the system is not
powered.
Remote control
6.
Will be developed later
BNC connector
7.
The BNC connector allows the user to synchronize the SmartCrystal™ Cinema Neo with
the cinema projector. Three cables are supplied with the SmartCrystal™ Cinema Neo:
BNC/BNC cable (2 meters long) BNC/GPIO 15 cable (2 meters long) BNC/GPIO 37 cable (2
meters long)
Connect the power cable to SmartCrsytal™ Cinema
8.
Power IN
