SmartCrystal™ Diamond
n ° : MUV140036
Version : A12
USER MANUAL
Date : 11/01/2018
www.volfoni.com
This document is the property of the Co VOLFONI and may not be reproduced or disclosed without permission.
12
The farther the device will be positioned from the room window, the larger the size of this latter should be. Do not hesitate to contact
your supplier for any technical support.
Image centering on the window
The projector has to be installed so that the image is centered to the room window, requirement all the more important if the latter is
minimum-sized (40cm X 40cm).
The projection room window must not depolarize light.
The image size at 2cm from the lens must not exceed 10 cm X 7 cm. This size corresponds to the size of the SmartCrystal™ Diamond
Box inflow window.
Film theatre configuration: ‘Throw Ratio’ of the cinema
b.
Before any installation, making sure that the device is compatible with the theatre is important. The ‘Throw Ratio’ (TR) enables a first
assessment.
If the projector outflow image meets the previous requirements (*), the ‘Throw Ratios’ to respect
are the following:
(*) : The SmartCrystal™ Diamond Box must be situated as close as possible to the lens, i.e. less than 2cm.
TR = (Distance between projector and screen => l) / (screen width => L)
THROW
RATIO
Config Flat - 1.85
Config Scope - 2.39
DLP
1.2’’
PROJECTOR
TR >= 1.35
TR >= 1.2
DLP
0.98’’
PROJECTOR
TR >= 1.30
TR >= 1.2
Fig 10
