SmartCrystal™ Diamond
n ° : MUV140036
Version : A12
USER MANUAL
Date : 11/01/2018
www.volfoni.com
This document is the property of the Co VOLFONI and may not be reproduced or disclosed without permission.
31
2.
Assembly of the SmartCrystal™ Diamond box on the bracket and positioning in
front of the projector
The purpose of this step is to assemble the SCD Box with the bracket and to make sure there is no risk
of contact with the projector and its lens.
Position the carriage as far as possible from the projector lens in order to avoid any risk of
contact with this latter during the assembly of the SmartCrystal™ Diamond Box on the carriage.
Assemble the SmartCrystal™ Diamond with the bracket carriage.
After positioning the SmartCrystal™ Diamond Box, fix it on the carriage using 4 screws.
The screws and the wrench are provided with the system (see packing list).
As the SmartCrystal™ Diamond Box is properly fixed on the carriage, make the carriage slide and check the absence of
contact with the projector and its lens. In case of contact, fit the bracket adjustment to eliminate any risk of contact.
STEP 40
STEP 41
In the next step we will mount the SCD on
the bracket. Before be sure that the
trolley of the bracket is far away enough
from the lens of the projector
Unscrew the 2 screws on the both side of the endless screw
Fig 18
