Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-111)
Initiating Output Diagnostic Test Mode
Notes:
If the engine is running or the vehicle moving the instrument panel Output Diagnostic
Test Mode cannot be initiated/will be interrupted.
The test sequence can be terminated at any time by pressing the "C" key.
- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".
After displaying the control unit identification and the immobilizer identification number:
- Press
key.
Indicated on display:
- Press keys 0 and 3 (03 selects the "Output Diagnostic Test Mode" function).
Indicated on display
- Confirm entry with key Q.
No indication on all displays and all warning lights to be checked are unlit.
Indicated on display