•<PDC-VOL> PDC-VOL setting range: 0 => 1=> 2 => 3 => 0
Note: the user can adjust the PDC-VOL level in four steps:
ATTENUA. 0 = without attenuation
ATTENUA. 1 = low attenuation (volume 13)
ATTENUA. 2 = mid attenuation (volume 7)
ATTENUA. 3 =
(default)
high attenuation (volume 0)
During the adjustment, no action for 5 seconds or short press HK [
menu.
] button will exit the audio setting
Prepared by Hector Gomez
HMI/ VWM DTEE / 52-222-2307414
DOC_HMI RADIO 1 DIN MIB-G LAM X1.8 / 11/10/2011
Page 54 of 65