01-284
Display group number 93: activation of ESP
driving test
The ESP driving test is used to check the
plausibility of the signals from sensor for
transverse acceleration -G200-, sender for
rotation rate -G202- and sender 1 for brake
booster -G201-.
The ESP driving test should be performed each
time parts of the ESP system are removed or
replaced.
- Connect V.A.G 1551 scan tool and select
(address word 03) brake electronics control
module (address word 03) with ignition switched
on;
Page 01-163
.
Rapid data transfer
HELP
Enter address word XX
Indicated on display:
- Press keys 0 and 4. (The function "Initiating
basic setting" is selected with 04).
Rapid data transfer
Q
04 - Basic setting
Indicated on display:
- Confirm entry with key Q.
Basic setting HELP
Enter display group number XXX
Indicated on display:
- Press keys 0, 9 and 3
Стр
. 126
из
129
On Board Diagnostic (OBD), performing